American Strapping Company is capable of providing you with all of your strapping & packaging needs. Whether you are in need of Strapping, Stretch Film, Angleboards, Tools, or Repair, American Strapping Company can meet those needs. Check out our Products page for more information on the products and services we offer.



PUSH-TYPE STEEL PNEUMATIC TENSIONERS

These tools are a part of a 2 tool system and require the use of a sealer

A feedwheel push-type tensioner is used for round or irregular shaped objects. These are light enough to not need a counterbalance and as a result are highly mobile and easy to carry.

Pneumatic tensioner are often used along with pneumatic sealers. While efficient and fast, it requires carrying air lines around the factory floor.

Part Number
Strap Width
Strap Thickness
Tension
More Info
ASCSTTR19/32
RECOMMENDED TOOL
3/4" (19 mm) - 1-1/4" (32 mm)
.023" (0.6 mm) - .043" (1.1 mm)
Up to 2,023 lbf  (9,000 N)
More Information

Quality European Made
3/4" (19mm) - 2" (50mm)
0.020" (0.51mm) - 0.044" (1.12mm)
Up to 1600 lbs (725 kg)
More Information

Made in the USA
3/4" (19mm) up to 2" (50mm)
.020"( .51mm) to .044"(1.12mm)
Up to 2000 lbs (907 kg)
More Information

Made in the USA



STEEL PNEUMATIC NOTCH SEALER

These tools are a part of a 2 tool system and require the use of a sealer

This tool applies a notch type joint to the seal and strap. It is used on high volume production and can be used in awkward positions.

This tool can be handled with a single hand and is easy to carry. With one pull on the switch, it applies the seal in an efficient matter.

This tool is only capable of sealing straps, so to reduce the workload of using multiple tools, please consider one of our combination tools like the ASCPNSTSR-2B or the ASCPHDC114.

 

Part Number
Strap Width
Strap Thickness
Joint Type
More Info
ASCSTPDN SERIES
RECOMMENDED TOOL
3/4" (19 mm) - 1-1/4" (32 mm)
.023" (0.6 mm) - .043" (1.1 mm) Rmax. 850N/mm²
0.24" (0.61mm) - .035" (0.9 mm) Rmax. 1.100N/mm²
Double Up Notch
More Information

Quality European Made
3/4"(19mm) - 1-1/4" (32mm)
.025"(.64mm) to .035"(.90mm)
Single Up Notch
More Information

Made in the USA
3/4” (19mm) - 1-1/4” (32mm)
0.024” (0.61mm) - 0.031” (0.79mm)
Single Up Notch
More Information

Made in the USA



STEEL PNEUMATIC CRIMP SEALER

These tools are a part of a 2 tool system and require the use of a tensioner.

This tool applies a crimp type joint ot the seal & strap.  It is used on high volume production and can be used in awkward positions.

This tool features pistol grips that are lightweight and can be used one handed while other diaphragm type tools require the use of both hands and better suited for heavy duty applications.

 

This tool is only capable of sealing straps, so to reduce the workload of using multiple tools, please consider one of our combination tools like the ASCPNSTSR-2B or the ASCPHDC114

 

 

Part Number
Strap Width
Strap Thickness
Joint Type
More Info
1-1/4” (32mm)
0.040” (1.1mm) - 0.050” (1.27mm)
Double Crimp
More Information

Made in the USA
2” (51mm)
0.044” (1.12mm) - 0.050” (1.27mm)
Single Crimp
More Information

Made in the USA



PNEUMATIC COMBINATION PUSHER TOOLS (MEDIUM DUTY)

These medium duty pneumatic push-type tools combine the functions of tensioning, sealing, and cutting.  They are used on round or irregular shaped objects.

These tools are standards in the steel industry.  For their size and weight, they are commonly counter weighted and hard to carry unassisted.

These are popular because pressing one button tensions, seals, and cuts in a matter of seconds.  As the tool is heavier, a spring balancer is recommended for maximum utility.

Part Number
Strap Width
Strap Thickness
Tension
More Info
ASC-PNST SERIES
RECOMMENDED TOOL
3/8” (10mm) - 3/4” (19 mm)
Regular Duty: .017" (0.4mm) - .030" (0.8mm)
High Tensile:.017" (0.4mm) - .025" (0.63mm)
Up to 1686 lbs. (765 kg)
More Information

Quality European Made
1/2” (12mm) - 3/4” (19mm)
0.017” (0.43mm) - - 0.025” (0.64mm)
Up to 1000 lbs (454 kg)
More Information

Made in the USA



PNEUMATIC COMBINATION PUSHER TOOLS (HEAVY DUTY)

These heavy duty pneumatic push-type tools combine the functions of tensioning, sealing, and cutting.  They are used on round or irregular shaped objects.

These tools are standards in the steel industry.  For their size and weight, they are commonly counter weighted and hard to carry unassisted.

These are popular because pressing one button tensions, seals, and cuts in a matter of seconds.  As the tool is heavier, a spring balancer is recommended for maximum utility.

Part Number
Strap Width
Strap Thickness
Tension
More Info
ASC-STS32PLUS4
HIGHLY RECOMMENDED TOOL
1-1/4" (32 mm)
.023" (0.6 mm) - .039" (1 mm) Rmax. 850N/mm²
max .031" (0.8 mm) at 65 psi (4.5 bar) / max .035" (0.9 mm) at 91 psi (6.3 ba
Up to 2,023 lbs.
More Information

Quality European Made
ASC-PNSTSR-2B SERIES
RECOMMENDED TOOL
3/4" (19mm) - 1-1/4" (32mm)
.024" (0.61 mm) - .031" (0.8 mm)
Up to 2030 lbs (920 kg)
More Information

Quality European Made
34” (19mm) - 1-1/4” (32mm)
0.024” (0.61mm) - 0.044” (1.12mm)
Up to 1600 lbs (725 kg)
More Information

Made in the USA
1-1/4" (32mm)
.024"(.61mm) to .035"(.90mm)
Up to 2000 lbs (907 kg)
More Information

Made in the USA



PNEUMATIC SEALLESS COMBINATION TOOLS

Part Number
Strap Width
Strap Thickness
Tension
More Info
ASC-PNINCA-HT SERIES
RECOMMENDED TOOL
1/2" (12mm) - 3/4" (19mm)
.015" (0.4 mm) to .025" (0.635mm) 800 N/mm² (RD)
.020" (0.51 mm) to .025" (0.635mm) Rmax. 1100N/mm² (HT)
Up to 1235 lbs (560 kg)
More Information

Quality European Made



TOOL ACCESSORIES

These items are optional; however, make using Tools easier and more accessible.

Part Number
DESCRIPTION
Tool Balancers suspend tools in the air to protect and position the tools for easy access when not in use.