AMERICAN STRAPPING COMPANY

CAST STRETCH WRAP

	PART NUMBER	SIZE		GAUGE	ROLLS PER CARTON	ROLLS PER SKID	WEIGHT PER CARTON
		WIDTH	LENGTH
	SFC-H1807015C	18"	1500'	70			30.24	as low as $15.33 / roll.
	SFC-H1208015C	12	1500'	80			23.04	as low as $12.75 / roll.
	SFC-H1808015C	18"	1500'	80			37	as low as $18.02 / roll.
	STF-B480	4"	1000'	80			15.36	as low as $3.46 / roll.
	STF-HWX2080	20"	1000'	80			25.60	as low as $16.49 / roll.
	STF-MF205080EPC	20	5000'	80			32	as low as $71.82 / roll.
	SFC-M2008050C	20	5000'	80			36	as low as $69.52 / roll.
	SFC-M2005090C	20	5000'	90			36	as low as $71.91 / roll.
	SFC-M2004390C	20	9000'	43			36	as low as $66.00 / roll.

Blown Stretch Wrap uses a melted plastic resin extracted into a closed circular bubble with air blown throgh to cool the resin. The inflated bubble is pulled upward by air and continuously adding more resin. Airflow is also used on the outside of the bubble to cool the film as it is being pulled upward. A continuous seamless tube of thin film is created. After the film has cooled it is slit, flattened, and wound into rolls.

Because blown stretch wrap uses a slower air cooled method, the film can crystallize and have a slight haze. Blown Stretch Wrap is often stronger than cast and can offer the ability to use a lower gauge compared to cast. We recommend blown film for companies wrapping very heavy pallet loads with sharp edges and corners.

Initial machinery start-up costs are often more for Cast Stretch Wrap in comparison to Blown; however, production is much cheaper than Blown Stretch Wrap. Cast Stretch Wrap offers the ability to make very thin uniform film. Hybrid stretch wraps and equivalent stretch wraps are made with the cast stretch wrap process.

Cast Stretch Wrap uses rollers to cool plastic resin. Once the resin is extracted from the extruder, it is immediately cooled and solidified on cooling rolls. When the film reaches the end of the cooling rolls it is trimmed and can be rolled directly onto a material roll for resale.